Banjo MFM100 25 mm (1 inch) open bore magnetic flow meter (6 x AA batteries included) 7.6 to 416 lpm

Banjo MFM100 25 mm (1 inch) open bore magnetic flow meter (6 x AA batteries included) 7.6 to 416 lpm
No moving parts
Flow range: 7.6 to 416 lpm (2 to 110 gpm)
Accuracy is 99% from 8 to 416 lpm (2 to 110 gpm)
Display:
Displays overall total volume and batch total volume
Easy to change six (6) AA batteries
Flow rate allows for US gallons or litres per minute
Glass-reinforced polypropylene material
No moving parts to fail during use
Self calibrating meter
Liquid temperature range from 0ºC to 66ºC (0ºC to 150ºC)
The display reads 6 digits for flow rate, 8 digits for total and 1 decimal place reading in tenths
There are 3 photo-eyes located on the face of the flow meter
Important: these are not push buttons, to activate you must hold your finger over the photo-eye for 2-4 seconds
Applications include: Most conductive liquids, Water, Fluids that contain some solids
Note: not suitable for petroleum based liquids
Important: It is recommended to have at least 10X the diameter of straight pipe before and after the flow meter
*Optional fittings kit includes:
2 x Banjo M100BSP adaptor 25 mm 1 inch BSP(M) x 25 mm 1 inch FP flange 28.M100BSP   
2 x Banjo M100BRB 25 mm 1 inch flange x 25 mm 1 inch hose barb 28.M100BRB    
2 x Banjo M101G 25 mm 1 inch EPDM manifold gasket 28.M101G
2 x Banjo FC100 100 series worm screw clamp 28.FC100