Honda Powered 50 mm 2 inch BSP(M) water pump - all models
Regular price
$946.00 NZD
excl GST
Couldn't load pickup availability
Honda-powered clean-water pump
50 mm water pump2 inch BSP(M) self-priming pump range
A robust general-purpose water pump range powered by genuine Honda four-stroke engines. Designed as a practical replacement option for the Honda WB20XT, with Daishin Japan SCR-50HX and Ketta SG pump models available.
520–556 lpmMaximum flow, depending on model
32–34 mMaximum head, depending on model
50 mm50 mm 2 inch BSP(M) ports
3 enginesHonda power options
Key features
Genuine Honda powerAvailable with Honda GX120, GX160 or GX200 four-stroke petrol engines.
High-volume transferMaximum flow up to 556 lpm for fast water movement.
Self-priming designSuitable for tank filling, irrigation, drainage and general clean-water transfer.
Standard 50 mm portsSuction and discharge connections are 2 inch BSP(M).
Durable pump constructionCast aluminium body with cast iron impeller and volute.
Reliable shaft sealingCarbon ceramic mechanical seal for dependable clean-water service.
Models and performance
SKUPump modelMaximum performance
10.1023DADaishin Japan SCR-50HX520 lpm · 32 m head · 3.2 bar
10.1738Ketta SG556 lpm · 34 m head · 3.4 bar
10.1378Ketta SG556 lpm · 34 m head · 3.4 bar
10.1378-BPKetta SG556 lpm · 34 m head · 3.4 bar
Technical data
- Pump type
- Self-priming centrifugal clean-water pump
- Replacement application
- Honda WB20XT pump
- Suction port
- 50 mm / 2 inch BSP(M)
- Discharge port
- 50 mm / 2 inch BSP(M)
- Engine option 1
- Honda GX120 · 3.5 hp
- Engine option 2
- Honda GX160 · 4.8 hp
- Engine option 3
- Honda GX200 · 5.5 hp
- Starting system
- Recoil and electric start option
- Pump body
- Cast aluminium
- Impeller
- Cast iron
- Volute
- Cast iron
- Mechanical seal
- Carbon ceramic
- SCR-50HX suction lift
- Up to 7.6 m / 25 ft
- Maximum pressure
- Up to 3.2 bar / 46 psi
Included equipment
- Hose tails
- Hose clips
- Suction strainer
Performance figures are maximum ratings and vary by pump model, engine selection, suction lift, hose diameter and length, fittings and installation conditions. Prime the pump before operation and use with clean water only unless suitability for another liquid has been confirmed.