Jabsco 17830-0012 reversible 12v bronze flexible impeller pump 3/8 inch NPT(F) 24 lpm

Jabsco 17830-0012 reversible 12v bronze flexible impeller pump 3/8 inch NPT(F)
Applications: oil change systems on boats and industrial equipment, diesel, water and more
Bronze pump body and flexible impeller, includes tap
Can to be installed near engine and permanently plumbed to the engine oil pan
Pump can then be used to remove old oil from the engine
With the integral reversing switch the flow direction can be changed to pump a measured amount of new oil back into the engine
The connection to the engine should be controlled by the 3/8 inch ball valve (provided) to guard against accidental oil discharge
Self-priming from dry up to 1.2 m (4ft)
Small bilge debris present no problem to these bronze bodied, flexible impeller pumps
Simple design means fewer wearing parts
Data:
Flow rate: 6.3 gallons/min (24 lpm)
Body: Bronze
Impeller: Nitrile
Seal: Buna lip type
Motor: reversible permanent magnet with integral reversing switch
Valve: 3/8 inch NPT(F) full flow ball type
Height: 4-7/16 inch (113 mm) including height of switch guard
Length: 7-7/8 inch (200 mm)
Width: 3-3/4 inch (95 mm)